Profibus Factory

We produce Profibus connectors, profibus cables and etc.

This content shows Simple View


Category Archives Mitsubishi PLC

Mitsubishi PLC Cable—QC30R2,QC30R2+ on Sale

There are some differences between QC30R2 and QC30R2+. And they will be stated as following. Please check them carefully and tell me where I need improve. Thanks!

QC30R2

QC30R2:RS232 Programming Cable for Q-PLC, 3 Meters.

QC30R2

—–>buy-button$16.00

RS232/RS232 interface, cable for Mitsubishi Q series PLC, 3 meters.

Not isolated, so it doesn't support hot plug, if need isolated cable, pls choose QC30R2+, you can click it : QC30R2+

QC30R2+

QC30R2+:Optical Isolated RS232 adapter for Q PLC

QC30R2+

—–>buy-button$78.00

Optical Isolated, RS232/RS232 interface, cable for Mitsubishi Q series PLC, 4.5 meters.

Defferences of These Two Cables

Interface: QC30R2:RS232/RS232 interface; QC30R2+: Optical Isolated, RS232/RS232 interface.

Length: QC30R2: 3 meters; QC30R2+: 4.5 meters.

If you'd like to get more, you can click here to visit our company store directly.
 

 

Pls feel free to contact me if any question.

Tel:86-755-26898905-8002

Email:crystal@kollewin.com

 




Mitsubishi PLC Cable—SC-10,USB-QC30R2

1SC-10

&

2USB-QC30R2

SC-10

$78.00 buy-button

———->>$78.00

SC-10:PLC remote modem communication cable

Go on long-distance communication for FX series(FX2/FX2n/FX0/FX0n..) with modem connecting telephone wire,the other function is the same as SC-09.

USB-QC30R2

$39.00 buy-button

———->>$39.00

Introduction
USB-QC30R2 is the programming cable in which USB interface provides both the serial connection and RS232 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of

this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data’s transceiving status.
USB-QC30R2 is applicable to Mitsubishi Q series PLC (Q mode)

 

USB-QC30R2 programming cable simulate USB port as traditional serial port (usually COM3), which enables existing programming software(GX Developer) to communicate through simulated traditional port and PLC devices.

Functions
● Support USB-QC30R2 programming software version: GPP V4.0, GX Developer V7.0 and above.
● Fully compatible with USB V1.1 norms and USB CDC V1.1
● USB-bus powered, with current consumption of 50 mA
● Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
● Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
● Each PC only supports one USB cable programming
● Working temperature: -20 ~ +75 'C
●  Color: black

Setting of GX Developer
 

Please set the driver procedure according to the following steps:
1. Turning on PC power that will connect the USB programming cable and make sure the USB port working well.
2. Put the USB programming cable into USB port and Windows will detect the device and help to add new hardware and jump to new device setting. Insert the driver CD and click “next” to continue, or select the driver on the hard disk.
If Windows does not show “find new hardware”, please click “Universal Serial Main Cable controllers” in the hardware list of device manager, and choose the USB device with question mark. Click the right key of mouse and operate to update driver procedure.

If insert the driver CD,you should select the recommended item and click “Next”.

If the driver is saved on the hard disk, you should select the second item and click “Next”. You can find the driver on the “USB Drivers1” folder.

3. Windows will detect the setting information, and load the driver to install.

4. Continue to set up, copy the driver procedure files to your hard disk by Windows.

5. When Windows appears “Completing the Found New Hardware Wizard”, click “finish” to end setting up.
6. After setting up, please make sure the "Ports (COM and LPT)" of "Start \ Settings \ Control Panel \ system \ hardware \ Device Manager" appears "USB Serial Port(COMx)". This COMx is the COM port of the USB programming cable. From then on, as long as you insert the programming cable, the COM port will appear. You just have to choose this COM port in application software such as programming software or communication software.

How to change COM setting
1. Delete the driver procedure of all USB to UART products to discharge COM port source, and reset up USB programming cable driver procedure. The device manager will display the cable address COM3.
2. In Windows 2000/XP the COM slogan can be changed directly. Please double click COM port device that is need changing in the device manager, and the device attribute information window will appear. Choose “port setting” as the picture shows. Click "Advanced" button, and the advanced setting information window will appear. Set the COM port to the serial number you want and click "OK" button to complete.

Setting of GX Developer
After completing Driver installation, the corresponding COM port for the USB-QC30R2 programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.
Open the main windows form(GX Developer), choose “Online” menu then click “Transfer Setup…” and will appear “Transfer Setup” window.
Click “Serial” button of the PC side I/F, and choice the COM X interface as it in the Device Manager.

About Long Distance Communication
USB-QC30R2 doesn’t support long distance communication.

Notes and Troubleshoot:
1. If the USB programming cable could not be detected when opening the PC, or some other outstanding issues occur, please replug it again.
2.USB to UART is plug and play USB device. When data are being transmitted, please don’t disconnect it.
3.Sometimes when Windows System failures or outstanding issues when plug or unplug the USB cable occur, please restart the computer and PLC.

More Related Mitsubishi Cable, pls click here:

ES-ETH-SC09 & FX-USB-AW

USB-SC09/USB-SC09-FX/SC-09/SC-09+

 

If you'd like to get more, you can click here to visit our company store directly.
 

 

Pls feel free to contact me if any question.

Tel:86-755-26898905-8002

Email:crystal@kollewin.com

 




Mitsubishi SC09 Series: USB-SC09,USB-SC09-FX,SC-09,SC09+

USB-SC09/USB-SC09-FX/SC-09/SC-09+

12

34

USB-SC09

—–>buy-button$39.00

USB-SC09:USB/RS422 adapter for Mitsubishi FX & A series PLC

Mitsubishi PLC Programming Replacement Cable USB SC09
USB Cable for Mitsubishi MELSEC FX and A series PLC. 8 pin DIN connector and DB-25 connector. Designed for computers without a serial port. This cable is an OEM replacement and not made by Mitsubishi.

Introduction
USB-SC09 is the programming cable in which USB interface provides both the serial connection and RS422 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data�s transceiving status.

USB-SC09 principle and figure structure:

Functions
● Support USB-SC09 operating system: Windows2000/XP(WinNT4/95/98/Me/DOS not support )
● Support USB-SC09 programming software version: FXGP / WIN V1.0,GPP V4.0, GX Developer V7.0 and above.
● Fully compatible with USB V1.1 norms and USB CDC V1.1
● USB-bus powered, with current consumption of 50 mA
● Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baudrate
● Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd /even / no parity
● Each PC only supports one USB cable programming
● Working temperature: -20 ~ +75 ℃
●Color: black

Usage:

USB device drivers should be installed before using USB-SC09 programming cable. After completing Driver installation, the corresponding COM port for the USB-SC09 programming cable will be displayed in the "Device Manager" of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.

Note: DB25M plugs and MD8M plugs of the RS422 interface can not be used at the same time.

USB-SC09-FX

USB-SC09-FX:USB/RS422 adapter for Mitsubishi FX series PLC

—–>buy-button$35.00

USB/RS422 interface,adapter for Mitsubishi FX2N/FX1N/FX0/FX0S/FX1S/FX3U series PLC,2.5 meters,with communication indicator, the largest communication distance of up to 2 kilometers. Compatible with FX-USB-AW.

Summary:

USB-SC09-FX is the programming cable in which USB interface provided both the serial connection and RS232 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data’s transceiving status.

USB-SC09-FX is applicable to the FX series PLC which has the MD8F radio socket of Mitsubishi, such as FX2N/FX1N/FX0/FX0N/FX0S/FX1S/FX3U, and it can substitute the FX-232AW module. The largest communications distance is two kilometers.

Do choose the USB-SC09 programming cable, for all FX series Mitsubishi PLC (including the old products FX2/FX2C).

Outline configuration:

Features and technological index:

● Support USB-SC09-FX programming software version: FXGP / WIN V1.0, GPP V4.0, GX Developer V7.0 and above.
● Fully compatible with USB V1.1 norms and USB CDC V1.1
● USB-bus powered, with current consumption of 50 mA
● Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
● Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
● Support long-distance communications, the largest communications is two kilometers (9600 bps)
● Each PC only supports one USB cable programming
● Working temperature: -20 ~ +75 'C
● Cable length: 2.5m; Color: black

Usage:

USB device drivers should be installed before using USB-SC09-FX programming cable.

After completing Driver installation, the corresponding COM port for the USB-SC09-FX programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.

Long-distance communications:

the largest communications range between the USB-SC09-FXprogramming cable and the PLC is up to two kilometers (9600 bps).The user must follow the self-made plans to extend cable. Transmission Line should be 0.22mm2 or more, twisted pair wire. When the distance is over 2,000 m , RS422 repeater (model: E485GA)could be installed to extend the distance.

Please Note: USB interface cable cannot be extended.

 Due to internal resistance have been installed in USB-SC09-FX and the PLC, no external terminal resistance is needed.

The quality is guaranteed.It's tested before shippment.Not made by Mitsubishi,OEM product as the replacement

SC-09

—–>buy-button$39.00

SC-09:RS232 programming cable for FX and A series PLC

Red Standard programming cable for all MELSEC FX and A series PLC's.

RS232/RS422 Connector,3 meters length

with indicator,copy original one

 

 

SC-09+

—–>buy-button$78.00

SC-09+:optoelectronic isolated RS232/RS422 adapter for FX PLC

SC-09 PLUS OPERATING INSTRUCTIONS

RS232C TO PROGRAMMABLE CONTROLLER ISOLATED CONVERTER INTERFACE FOR? MITSUBISHI ELECTRIC MELSEC-PC & FUJI ELECTRIC FLEX-PC

_____________________________________________________________________________________________

Before using this interface unit , be sure to read this OPERATING INSTRUCTIONS thoroughly to ensure proper operation.

This unit is the dedicated specified cable to connect the personal computer to the MITSUBISHI ELECTRIC MELSEC-PC or FUJI ELECTRIC FLEX-PC N-series.

The Personal Computer side :

. IBM AT personal computer or 100% compatible

. MS-DOS version 3.2 or higher

. 640KB RAM

. min. 10MB Hard Disk

. RS232C Serial port

Software Package :

. MEDOC/SFC/FX-MING for MITSUBISHI ELECTRIC MELSEC-PC

The Programmable Controller side :

For PC/PERSONAL COMPUTER communication,the following external equipment is required :

For MITSUBISHI ELECTRIC MELSEC-PC:

FX2 / FX2C… —- SC-09+

FX0 / FX0s / FX0n / FX2n … —- SC-09+ and FX-20P-CADP

A series —- SC-09+

General Specifications :

Cooling method : Self-cooled

Operating temperature and humidity : -15 oC to 75 oC, 20% to 95%(RH) (no condensation)

Storage temperature : -30 oC to +85 oC

Power supply : Non-powered

Max. Speed : 110Kbps

Max. Line length : 2km(9600bps) using gauge wire

Isolated voltage: 2.5kV

Weight : Approx . 150g

Cable length : 2m

If you'd like to get more, you can click here to visit our company store directly.
 

 

Pls feel free to contact me if any question.

Tel:86-755-26898905-8002

Email:crystal@kollewin.com

 

 

 




mitsubushi,usb adapter, usb-sc09

Mitsubushi

Mitsubishi_logo.svgThe Mitsubishi Group (三菱グループ, Mitsubishi Gurūpu) (also known as the Mitsubishi Group of Companies or Mitsubishi Companies) is a group of autonomous Japanese multinational companies covering a range of businesses which share the Mitsubishi brand, trademark, and legacy.

The Mitsubishi group of companies form a loose entity, the Mitsubishi Keiretsu, which is often referenced in Japanese and US media and official reports; in general these companies all descend from the zaibatsu of the same name. The top 25 companies are also members of the Mitsubishi Kin'yōkai, or "Friday Club", and meet monthly. In addition the Mitsubishi.com Committee exists to facilitate communication and access of the Mitsubishi brand through a portal web site.

USB adapter

A USB adapter is a type of protocol converter which is used for converting USB data signals to and from other communications standards. Commonly, USB adaptors are used to convert USB data to standard serial port data and vice versa.

Most commonly the USB data signals are converted to either RS232, RS485, RS422 or TTL serial data. The older serial RS423 protocol is rarely used any more, so USB to RS423 adapters are hard to find.

Uses

USB to serial RS232 adapters are often used with consumer, commercial and industrial applications and USB to serial RS485/RS422 adapters are usually mainly used only with industrial applications.

Adapters for converting USB to other standard or proprietary protocols also exist; however, these are usually not referred to as a serial adapter.

The primary application scenario is to enable USB based computers to access and communicate with serial devices featuring D-Sub (usually DB9 or DB25) connectors or screw terminals, where security of the data transmission is not generally an issue.

USB serial adapters can be isolated or non-isolated. The isolated version has opto-couplers and/or surge suppressors to prevent static electricity or other high-voltage surges to enter the data lines thereby preventing data loss and damage to the adapter and connected serial device. The non-isolated version has no protection against static electricity or voltage surges, which is why this version is usually recommended for only non-critical applications and at short communication ranges.

USB-SC09

USB/RS422 interface,adapter for Mitsubishi FX & A series PLC, with communication indictor.

USB-SC09:USB/RS422 adapter for Mitsubishi FX & A series PLC

USB-SC09USB-SC09

  Price: $39.0 BUYNOW-BUTTON2

Mitsubishi PLC Programming Replacement Cable USB SC09
USB Cable for Mitsubishi MELSEC FX and A series PLC. 8 pin DIN connector and DB-25 connector. Designed for computers without a serial port. This cable is an OEM replacement and not made by Mitsubishi.

Introduction
USB-SC09 is the programming cable in which USB interface provides both the serial connection and RS422 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data�s transceiving status.

USB-SC09 principle and figure structure:

Functions
● Support USB-SC09 operating system: Windows2000/XP(WinNT4/95/98/Me/DOS not support )
● Support USB-SC09 programming software version: FXGP / WIN V1.0,GPP V4.0, GX Developer V7.0 and above.
● Fully compatible with USB V1.1 norms and USB CDC V1.1
● USB-bus powered, with current consumption of 50 mA
● Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baudrate
● Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd /even / no parity
● Each PC only supports one USB cable programming
● Working temperature: -20 ~ +75 ℃

●Color: black

Usage:

USB device drivers should be installed before using USB-SC09 programming cable. After completing Driver installation, the corresponding COM port for the USB-SC09 programming cable will be displayed in the "Device Manager" of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.


Note: DB25M plugs and MD8M plugs of the RS422 interface can not be used at the same time.

 

More Pictures of USB-SC09

abcdef

 

If you'd like to get more, you can click here to visit our company store directly.

 

Pls feel free to contact me if any question.

Tel:86-755-26898905

Email:crystal@kollewin.com

 





360վȫƽ̨