Profibus Factory

We produce Profibus connectors, profibus cables and etc.

This content shows Simple View


Category Archives Siemens S7-200

TSXCUSB485C,PLC Programming Cable, multi-functional programmable cable

TSXCUSB485C,PLC Programming Cable, multi-functional programmable cable

12

—–>buy-button$55.00

Overview:

TSXCUSB485C is a multi-functional programmable cable which is provides serial connection and RS485 signal conversion through the USB interface, whose power from the USB port, no longer need power by the PLC’ s TER port. Therefore, this cable can communicate with PLC’ s TER or HIM or AUX port. TSXCUSB485C can be used for Schneider Modicon TSX series PLC or HMI to communicate with the computer. It can also be directly connected to the computer communicate with Premium, Micro, Nano, Naza, Twido and series of PLC, or connected to the computer to communicate with OTB, XBTN/R/S and TSXSCA62 after changing the different adapter cables.

TSXCUSB485C programmable cable is the upgraded product of TSXPCX3030.

The snap switch located on the TSXCUSB485C’s converter box is used to choose different operating modes. The cable rejects the way which the transceiving of the RS485 is controlled by the PLC, and all the data transceiving is automatically controlled. It can be used for multi-point and communication applications.

The TER port of Schneider TSX series PLC has a PMC (mode control) signal pin, which is used to determine its working mode. If the PMC is high level, TER port always works in Uni-Telway Master (master station) mode, should be used this mode for PLC programming. If the PMC is low level, the working mode of TER port is decided by the PLC. General way from the station mode.

Product configuration:

This product includes TSXCUSB485C adapter and TSXCRJMD25 adapter cable which can be directly connected to PLC. By choosing different adapter cables then can connected to the touch panel etc for communication. These cables are straight-through cables. Users can self-refer to the relevant wiring diagram.

Note: RJ45 socket 6-pin RS485 drive defined Schneider enabled control signal NDE (input). As TSXCUSB485C using automatic data flow control, there is no need to use the control signal it.

Select different adapter cables to connect different devices

 

Features and technical parameters:                                         

  • Supported operating system: Windows2000/XP/Vista/Win7
  • Fully compatible with USB V1.1 and USB  V2.0
  • USB bus-powered with current consumption of approx. 50mA and maximum output current of 500mA.
  • Baud rate: 300bps~1Mbps auto-adaptation
  • Power indicator and data in/out indicator
  • Applicable in Premium, Micro, Naza, Nano, Twido, OTB, XBTN/R/S and TSXSCA62.
  • Each set of product includes TSXCUSB485C adapter and TSXCRJMD25 cable.
  • Overall length: 2.5m. Color: black.
  • The adapter can be installed in DIN35mm standard rail.
  • Operating temperature: -40~+85℃

 

Usage:                                                    

TSXCUSB485C need to install two drivers to use.

1. USB driver.

2. Schneider Uni-Telway driver or MODBUS driver.

These drivers are usually included in the programming software on CD-ROM. And for the specific installation steps, please refer to the installation files on the CD-ROM drivers , and details are not necessary listed here. 

Until March 2013, Schneider has not yet released to support 64-bit operating system drivers.

The quality is 100% guaranteed,1 year warranty.       

Inventory is accurate and up to date.
Please add items to your cart if you would like a formal quote or order online.

If you'd like to get more, you can click here to visit our company store directly.
 

 

Pls feel free to contact me if any question.

Tel:86-755-26898905-8002

Email:crystal@kollewin.com




USB8550:USB adapter for Panasonnic FP1/FP3/FP5 PLC(need convert cable)

USB8550:USB adapter for Panasonnic FP1/FP3/FP5 PLC(need convert cable)
USB/RS422 interface Panasonnic PLC adapter for FP1/FP3/FP5 PLC(need convert cable),1 meter,with communication indicator,the largest communication distance of up to 2 kilometers.

The quality is guaranteed.It's tested before shippment.Not made by Panasonnic,OEM product as the replacement.

 
USB8550:USB adapter for Panasonnic FP1/FP3/FP5 PLC(need convert cable)
USB8550.jpg

—–>buy-button$45.00

1.jpg
2.JPG
 
Related products:
USB8550
USB8551
USB8513

If you'd like to get more, you can click here to visit our company store directly.

 

Pls feel free to contact me if any question.

Tel:86-755-26898905-8002

Email:crystal@kollewin.com




1747-UIC, USB to DH485 adapter for Allen-Bradley PLC

1747-UIC, USB to DH485 adapter for Allen-Bradley PLC

1

—–>buy-button$80.00

100% compatible with Allen Bradley original 1747-UIC,AB SLC5/01/02/03/05 series  PLC programming cable,use AB original driver,with indicator.

 

1.Overview:
 
The 1747-UIC allows you to connect devices that communicate using DH-485 protocol directly to a computer’s USB port, using either the 1747-UIC’s RS-232 or
RS-485 port and user-provided programming cables. Three LED indicators on the 1747-UIC provide communication status.
 
2.Computer and Operating System Requirements:
 
The USB to DH-485 interface converter works with RSLinx version 2.41 or higher and Windows98/2000/XP, on computers equipped with USB ports.
Install the Interface Converter
 
3.To install the interface converter:
 
1. Determine whether you will mount the interface converter. The interface converter can be mounted on a DIN rail using the DIN rail mounting kit (included).
2. Install the Ferrite Collar for EMC Compliance.
3. Slide the switch (SW) on the interface converter to indicate the appropriate port.
 
Install the Ferrite Collar (European EMC Compliance)
Install the provided ferrite collar on the 1747-UIC cable for suppression of electromagnetic emissions and interference. The collar is required for compliance with the European EMC directive.
 To be most effective, the ferrite collar must be placed between the cable ties on the USB cable where the cable exits the 1747-UIC interface converter.
1. Fold the collar so that it encircles the cable.
2. Press the plastic housing until the collar snaps together.
3. Check that the collar is fully latched.
 

More related Products:

1747-UIC : 1747-UIC, USB to DH485 adapter for Allen-Bradley PLC

1747-PIC : 1747-PIC adapter for SLC 5/00,5/01,5/02,5/03 PLC 

USB-1747-CP3 : USB adapter for AB SLC 5/03,5/04,5/05 PLC

If you'd like to get more, you can click here to visit our company store directly.
 

 




1747-CP3:Allen-Bradley Rockwell SLC 5/03,5/04,5/05 PLC programming cable

ALLEN BRADLEY SLC 5/03,5/04,5/05 PLC programming cable Not made by ALLEN BRADLEY,OEM replacement cables

2

—–>buy-button$20.00

Specifications

1.1747-CP3(USB)
2.new and original
3hot parts in stock
4.best price, reliable quality

1.Our Operation Orinciple: 1) Quality first, customer supreme.2) Integrity management, credit highest.
2.Our service:1) We provide professional one-stop electronic components supporting services.

 

Shipping:

1. We can shipping all over the world by DHL , UPS , FedEx and EMS . The packaging is very safe and strong. If you have any special needs please nitfy me.

2. It will take around 3-5 days to reach your hands.

 

Product Type & Condition :

1. Because of the fluctuant sales situation. the stock parts are always changing and the stock list cannot be promptly updated . So,please consult the stock situation when you inquire.

 

Warranty & Guarantee :

All components we sell the quality with 30 days Return policy from the day of shipment.

 

Buyer Reading:

1. Please confirm receipt of products if the items you received , and if the goods was damaged please contact us immediately. send the photo to us that we can check and give you best solution .

2. We only guarantee Delivery in time but we couldn't control the express delivery time. Our related sales person will be responsible to send the AWB for the delivered goods in the next workday. you can check the AWB in the website which we send to you. For the AWB you also can call to the local branch of the express company in your company.

If you have any other questions please feel free to contact us in any time.

More related Products:

1747-UIC : 1747-UIC, USB to DH485 adapter for Allen-Bradley PLC

1747-PIC : 1747-PIC adapter for SLC 5/00,5/01,5/02,5/03 PLC 

USB-1747-CP3 : USB adapter for AB SLC 5/03,5/04,5/05 PLC

If you'd like to get more, you can click here to visit our company store directly.
 

 

Pls feel free to contact me if any question.

Tel:86-755-26898905-8002

Email:crystal@kollewin.com




Communication cards,CP5512 EXP-NEW, Similar to CP5512

About Communication cards,we have discussed in the last essasy, and three kinds of communication cards have been shown out. Now I'll take CP5512EXP as example, which is much similar to CP5512, to show more information about communication cards.

CP5512 EXP-NEW

ExpressCard CP5512,it’s suitable for Laptop Expresscard slot,is used to achieve PROFIBUS/MPI/PPI/FWLcommunication between PC and SIMATIC Net. Communication speed is 9.6Kbps–12Mbps.It can be also used for desktop computer after the conversion card.

CP5512 Express slot PROFIBUS/MPI/PPI/FWL communication Card for Siemens S7-200/300/400 PLC, 6GK1551-2AA00

cp5512Ecp5512E

BUYNOW-BUTTON2       $475.00

Introduction:

Nowadays the laptops have eliminated the PCMCIA slot,but adopt the ExpressCard slot.So we especially develop the CP5512 EXPRESS for ExpressCard laptop. 

ExpressCard CP5512,it’s suitable for Laptop Expresscard slot,is used to achieve PROFIBUS/MPI/PPI/FWLcommunication between PC and SIMATIC Net. Communication speed is 9.6Kbps–12Mbps.It can be also used for desktop computer after the conversion card.

Not inlcude the MPI extension cable,for MPI cable,please click this link to get: MPI Cable

The function of our CP5512 EXPRESS is the totally same as Siemens original CP5512 except they use on different laptop interfaces.It’s the isolated PROFIBUS/MPI/PPI/FWL communication card specially for laptop, use iCoupler Magnetic Coupling isolators to replace the optocoupler,with small  dimension, wide temperature range,and have anti-lightning and surging protective circuit and resumption of Overcurrent protection circuit on the RS485 interface, all use industrial IC in order to apply to wider temperature range, is used to achieve PROFIBUS/MPI/PPI/FWL communication connection between laptop and SIMATIC.

CP5512 EXPRESS also can be used on PCI-E slot of desktop computer after the PCI-E to ExpressCard converter, the function is same as Siemens CP5611,CP5621.

CP5512 EXPRESS support hot plug and plug and play. Perfect isolation circuit and interface protective circuit make you at ease to use it.

Communication service:                                                               

PROFIBUS-DP master station class 1 and 2
PROFIBUS-DP slave and SOFTNET-DP slave
MPI/PPI/FWL communication
S7 communication with SOFTNET-S7
S5-compatible communication (SEND/RECEIVE based on the FDL interface) with SOFTNET-D or SOFTNET-S7

 

If you'd like to get more, you can click here to visit our company store directly.

 

Pls feel free to contact me if any question.

Tel:86-755-26898905-8002

Email:crystal@kollewin.com




USB/PPI, USB/PPI PDF, USB/PPI :Siemens S7-200 PLC Programming cable,replace 6ES7901-3DB30-0XA0

USB/PPI interface, programming cable for Siemens S7-200 PLC, 3 meters, with communication indicator, can replace 6ES7 901-3DB30-0XA0, the largest communication distance of up to 2 kilometers. Not support multimaster station communication.

USB/PPI Programming Cable Driver Procedure Setting Guideline PDF:usb-ppi-s7-200-user-manual

USB/PPI :Siemens S7-200 PLC Programming cable,replace 6ES7901-3DB30-0XA0

USB/PPI

6ES7 972-0BB12-0XA0 button $33.00

USB/PPI interface,programming cable for Siemens S7-200PLC,replace 6ES7 901-3DB30-0XA0
 
New OEM Siemens S7-200 USB-PPI PLC Programming cable

 

Introduction
USB/PPI programming cable simulates USB port as traditional serial port (usually COM3), which enables existing programming software(STEP7-MicroWin) to communicate through simulated traditional port and PLC
devices.
The working power of this cable is from USB port,not provided by the communication port of PLC.The LED of the adapter indicates the sending and receiving status of data.


USB/PPI is applied to Siemens S7-200 PLC,NOT support hot plug.For the industry scene of strong interference and easily destroying communication port,

pls choose optoelectronic isolated USB/PPI+ programming cable.

 

PIN Signal Description
3 RxD/TxD+ Data signal B(RS485+)
8 RxD/TxD- Data signal A(RS485-)
5 GND GND

Pin signal definition

Functions
● Support Windows2000/Windows XP
● Support STEP7 Micro/WIN V3.2 and higher
● Fully compatible with USB V1.1 and USB CDC V1.1
● Power supply by USB main line.current:about 50mA.
● Baud rate: 300bps ~ 1Mbps
● Support long distance communication up to 2000m
● Working temperature -20~+75'C
● Length 3 meters.Color:black
● One pc supports one USB programming cable only

System requirement
Please make sure your PC is IBM PC compatible and has the following
system requirements before using the USB programming cable.
● Intel is compatible with 586DX4-100MHz CPU or higher
● A standard USB port (4-pin A plug)
● Operating system is Windows2000 or Windows XP

The setting of driver procedure
Please set the driver procedure according to the following steps:
1. Turning on PC power that will connect the USB programming cable and make sure the USB port working well.
2. Put the USB programming cable into USB port and Windows will detect the device and help to add new hardware and jump to new device setting.
Insert the driver CD and click “next” to continue, or select the driver on the hard disk.
If Windows does not show “find new hardware”, please click “Universal Serial bus controllers” in the hardware list of device manager, and choose the USB
device with question mark. Click the right key of mouse and operate to update driver procedure.

If insert the driver CD,you should select the recommended item and click “Next”

If the driver is saved on the hard disk, you should select the second item and click “Next”. You can find the driver on the “WIN” folder.

3. Windows will detect the setting information, and load the driver to install.

4. Continue to set up, copy the driver procedure files to your hard disk by Windows.

5. When Windows appears “Completing the Found New Hardware Wizard”, click “finish” to end setting up.

6. After setting up, please make sure the "port (COM and LPT)" of "Start \Settings \ Control Panel \ system \ hardware \ Device Manager" appears
"CP2101 USB to UART Bridge Controller(COMx)". This COMx is the COM message of the USB programming cable.

From then on, as long as you insert the programming cable, the COM port will appear.

You just have to choose this COM port in application software such as programming software or communication software.

The deletion of driver procedure
Deleting driver procedure is to discharge source of COM port so that other
device can be used. When driver procedure has error, it should be deleted and reset up. Please delete the driver procedure as follows:
1. Unplug the USB programming cable from you PC.
2. Choose “USB Serial Converter Drivers”from "Add or Delete Programs” in operation panel, and click the “Change/Remove” button.

How to change COM setting
1. Delete the driver procedure of all USB to UART products to discharge COM port source, and reset up USB programming cable driver procedure.

The device manager will display the cable address COM3.
2. In Windows 2000/XP the COM slogan can be changed directly. Please double click COM port device that is need changing in the device manager,
and the device attribute information window will appear. Choose “port setting” as the picture shows. Click "Advanced" button,

and the advanced setting information window will appear. Set the COM port to the serial number you want and click "OK" button to complete.

Setting of Step 7-MicroWin

Open the main windows form(Step7-MicroWin), click “Set PG/PC Interface” of the left view and will appear PG/PC setting window.

1.Double click “PC/PPI cable(PPI) ” to open COM port and PPI port parameter setting dialog box.

2.Click “Local Connection” to set COM port parameter, choose correctly COM port in the device manager after install the driver,

and set the transmission rate as 9600bps or 19200bps,which is both OK, then the USB/PPI will adapt the baud rate automatic.

About Long Distance Communication
For USB/PPI, the largest communication distance is up to 2000m at the communication speed of 9600bps.

It needs to splice 120ohm terminal resistance between 3 and 8 pin on the RS485 port(DB9 Male) to eliminate signal reflection.

But requires one PFB-G for each PLC.

Notes and Troubleshoot
1. If the USB programming cable could not be detected when opening the PC, or some other outstanding issues occur, please replug it again.
2.USB to UART is plug and play USB device. When data are being transmitted,please don’t disconnect it.
3. Sometimes when Windows System failures or outstanding issues when plug or unplug the USB cable occur, please restart the computer and PLC.
4. USB/PPI cable don’t support “USB” interface in the Step7-MicroWin,so you should choose “COM” port.
5. If the COM port with “*” symbol in the software,such as “*COM3”,it indicates this COM port is at fault,pls exit programming software and then replug the USB port or reinstall the USB driver.
6. It doesn’t support 187.5Kbps baud rate.

Rejection provision
This document is to provide information, and the contents will not be noticed when revising. Because of the direct or indirect loss or errors caused by revised document,

will not be the responsibility of the manufacturer.

Package Includes:

OEM Siemens S7-200 USB PPI PLC Cable  X   1

 

More related products: USB/PPI+, USB/PPIM+, PC/PPI, PC/PPI+

If you'd like to get more, you can click here to visit our company store directly.
 

 

Pls feel free to contact me if any question.

Tel:86-755-26898905-8002

Email:crystal@kollewin.com

 

 




6ES7 392-1AM00-0AA0,40 pin Connector,6ES7 392-1AJ00-0AA0,20 pin Connector

6ES7 392-1AM00-0AA0,40 pin Connector,6ES7 392-1AJ00-0AA0,20 pin Connector

 

20 pin Connector—6ES7 392-1AJ00-0AA0

 

S7-300 front connector(20 pin)

 

1

6ES7 972-0BB12-0XA0 button $10.5

100 or more $8.40
200 or more $7.40
500 or more $6.40

 

 

Not made by Siemens,but the quality is 100% guaranteed,1 year warranty.

40 pin Connector—6ES7 392-1AM00-0AA0

3926ES7 972-0BB12-0XA0 button $16.90

S7-300 front connector(40 pin)       S7-300,FRONT CONNECTOR WITH SCREW CONTACTS,40-pin                              

Production China
System Name: Simatic S7 System SubType: S7-300
Approx. Dimensions: 1" x 5" x 1" (3cm x 13cm x 3cm) Approx. Weight: 0 lbs, 4 oz (0.1 kg)

Not made by Siemens,but the quality is 100% guaranteed,1 year warranty.       

Inventory is accurate and up to date.
Please add items to your cart if you would like a formal quote or order online.

 




Profibus Connector Economical and Practical 6ES7 972-0BB42-0XA0

6ES7 972-0BA42-0XA0 and 6ES7 972-0BB42-0XA0 are two kinds of profibus connector which are very same.The difference is that 6ES7 972-0BA42-0XA0 is without PG port,but 6ES7 972-0BB42-0XA0 is with PG port.

6ES7 972-0BA42-0XA0 PDF:6ES7972-0BA42-0XA0-datasheet-en

6ES7 972-0BB42-0XA0 PDF:6ES7972-0BB42-0XA0-datasheet-en

Specification of 6ES7 972-0BB42-0XA0:

6ES7972-0BB42-0XA0
ProductBUYNOW-BUTTON2

 

 

 

 

SIMATIC DP, BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S WITH TILTED CABLE OUTLET, 15,8 X 54 X 39,5 MM (WXHXD), TERMINAT. RESIST. WITH ISOLAT. FUNCTION, WITH PG SOCKET

 

 

 

 

 

 

Product
Article Number (Market Facing Number) 6ES7972-0BB42-0XA0
Product Description SIMATIC DP, BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S WITH TILTED CABLE OUTLET, 15,8 X 54 X 39,5 MM (WXHXD), TERMINAT. RESIST. WITH ISOLAT. FUNCTION, WITH PG SOCKET
Product family RS485 bus connector
Product Lifecycle (PLM) PM300:Active Product
Price data
Price Group 250
Surcharge for Raw Materials None
Metal Factor None
Delivery information
Export Control Regulations AL : N / ECCN : N
Delivery Time 1 Day/Days
Net Weight (kg) 0,051 Kg
Product Dimensions (W x L x H) Not available
Packaging Dimension 6.80 x 7.80 x 3.00
Package size unit of measure CM
Quantity Unit Piece
Packaging Quantity 1
Additional Product Information
EAN 4025515078296
UPC Not available
Commodity Code 85369010
LKZ_FDB/ CatalogID ST76
Product Group 4059
RoHs Compliance RoHS compliant since: 14.04.2010
Product class A: Standard product which is a stock item could be returned within the returns guidelines/period.
Obligation Category for taking back electrical and electronic equipment after use No obligation to take back electrical and electronic equipment after use
Classifications
 
  Version Classification
eClass 4 27-24-21-01
eClass 5.1 27-24-26-92
eClass 6 27-24-26-92
ETIM 5 EC002584
UNSPSC 8 43-20-15-44

If you'd like to get more, you can click here to visit our company store directly.

 

Pls feel free to contact me if any question.

Tel:86-755-26898905

Email:crystal@kollewin.com

 




Economical and Practical Profibus Connector 6ES7 972-0BA42-0XA0

6ES7 972-0BA42-0XA0 and 6ES7 972-0BB42-0XA0 are two kinds of profibus connector which are very same.The difference is that 6ES7 972-0BA42-0XA0 is without PG port,but 6ES7 972-0BB42-0XA0 is with PG port.

6ES7 972-0BA42-0XA0 PDF:6ES7972-0BA42-0XA0-datasheet-en

6ES7 972-0BB42-0XA0 PDF:6ES7972-0BB42-0XA0-datasheet-en

Specification of 6ES7 972-0BA42-0XA0:

6ES7972-0BA42-0XA0
SIMATIC DP,BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S WITH TILTED CABLE OUTLET, 15,8 X 54 X 39,5 MM (WXHXD), TERMINAT. RESIST. WITH ISOLAT. FUNCTION, WITHOUT PG SOCKET

 

 

 

Product
Article Number (Market Facing Number) 6ES7972-0BA42-0XA0
Product Description SIMATIC DP,BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S WITH TILTED CABLE OUTLET, 15,8 X 54 X 39,5 MM (WXHXD), TERMINAT. RESIST. WITH ISOLAT. FUNCTION, WITHOUT PG SOCKET
Product family RS485 bus connector
Product Lifecycle (PLM) PM300:Active Product
Price data
Price Group 250
Surcharge for Raw Materials None
Metal Factor None
Delivery information
Export Control Regulations AL : N / ECCN : N
Delivery Time 1 Day/Days
Net Weight (kg) 0,046 Kg
Product Dimensions (W x L x H) Not available
Packaging Dimension 6.80 x 7.80 x 3.00
Package size unit of measure CM
Quantity Unit Piece
Packaging Quantity 1
Additional Product Information
EAN 4025515078500
UPC Not available
Commodity Code 85369010
LKZ_FDB/ CatalogID ST76
Product Group 4059
RoHs Compliance RoHS compliant since: 14.04.2010
Product class A: Standard product which is a stock item could be returned within the returns guidelines/period.
Obligation Category for taking back electrical and electronic equipment after use No obligation to take back electrical and electronic equipment after use
Classifications
 
  Version Classification
eClass 4 27-24-21-01
eClass 5.1 27-24-26-92
eClass 6 27-24-26-92
ETIM 5 EC002584
UNSPSC 8 43-20-15-44

If you'd like to get more, you can click here to visit our company store directly.

 

Pls feel free to contact me if any question.

Tel:86-755-26898905

Email:crystal@kollewin.com

 




What is Profibus?Profibus Siemens—6ES7 972-0BA41-0XA0

What is profibus?

PROFIBUS is an international fieldbus communications standard for linking process control and plant automation modules. Instead of running individual cables from a main controller to each sensor and actuator, a single multi-drop cable (or other communications link – eg fibre or wireless) is used to connect all devices, with high speed, bi-directional, serial messaging used for transfers of information.

Profibus Siemens

 Profibus Siemens—6ES7 972-0BA41-0XA0

6ES7972-0BA41-0XA0
Siemens profibus 6ES7 972-0BA41-0XA0

—–>buy-button$16.00

 

 

 

 

SIMATIC DP,BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S WITH TILTED CABLE OUTLET, 15,8 X 54 X 39,5 MM (WXHXD), TERMINAT. RESIST. WITH ISOLAT. FUNCTION, WITHOUT PG SOCKET
Notes
Product is no longer available. Successor: 6ES7972-0BA42-0XA0

 

 

Product
Article Number (Market Facing Number) 6ES7972-0BA41-0XA0
Product Description SIMATIC DP,BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S WITH TILTED CABLE OUTLET, 15,8 X 54 X 39,5 MM (WXHXD), TERMINAT. RESIST. WITH ISOLAT. FUNCTION, WITHOUT PG SOCKET
Product family Not available
Product Lifecycle (PLM) PM500:Discontinued Product or end of PLM & Support
PLM Effective Date End of product lifecycle since: 19.08.2010
Notes
Product is no longer available. Successor: 6ES7972-0BA42-0XA0
Successor information
Successor 6ES7972-0BA42-0XA0
Successor Description SIMATIC DP,BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S WITH TILTED CABLE OUTLET, 15,8 X 54 X 39,5 MM (WXHXD), TERMINAT. RESIST. WITH ISOLAT. FUNCTION, WITHOUT PG SOCKET
Price data
Price Group  
List Price Show prices
Customer Price Show prices
Surcharge for Raw Materials None
Metal Factor None
Delivery information
Export Control Regulations ECCN : N / AL : N
Delivery Time On request
Net Weight (kg) 0,046 Kg
Product Dimensions (W x L x H) Not available
Packaging Dimension 6.30 x 7.30 x 5.10
Package size unit of measure CM
Quantity Unit Piece
Packaging Quantity 1
Additional Product Information
EAN 4025515067092
UPC Not available
Commodity Code 85369010
LKZ_FDB/ CatalogID ST9-E5
Product Group 2303
RoHs Compliance RoHS compliance in clarification
Product class D: products made to order / customer's specifications, requiring engineering services, which cannot be re-used or utilized (design to customer)
Obligation Category for taking back electrical and electronic equipment after use No obligation to take back electrical and electronic equipment after use

Not made by Siemens,but the quality is 100% guaranteed,1 year warranty.

If you'd like to get more, you can click here to visit our company store directly.

Pls feel free to contact me if any question.

Tel:86-755-26898905-8002

Email:crystal@kollewin.com





360վȫƽ̨