Model:USB-XW2Z-200S, USB programming cable for OMRON PLC

Model:USB-XW2Z-200S, USB programming cable for OMRON PLC

 

USB interface Omron PLC communications programming cable, USB/RS232 interface (DB9), 3 m.

    USB-XW2Z-200S is the programming cable in which USB interface provided both the serial connection and RS232 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates datas transceiving status.

    USB-XW2Z-200S is applicable to Omron PLC, with a direct connection to the RS232 interfaces (DB9F- Hole Block) on all models of Omron PLC or the Omron touch panel RS232 interface (DB9F-Hole Block).

Features and technological index:

Support USB-XW2Z-200S operating system: Windows2000/XP (WinNT4/95/98/Me/DOS not included )
Support USB-XW2Z-200S programming software version: CX-Programmer V1.0 and above
Fully compatible with USB V1.1 norms and USB CDC V1.1
USB-bus powered, with current consumption of 50 mA
Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
Each PC only supports one USB cable programming
Working temperature: -20 ~ +75
Cable length: 3 m; Color: black

Usage:

    USB device drivers should be installed before using USB-XW2Z-200S programming cable, which are available on the CD-ROM sold together with the cable. And for the specific installation steps, please refer to the instruction files on the CD-ROM drivers, and details are not necessarily listed here.

    After completing Driver installation, the corresponding COM port for the USB-XW2Z-200S programming cable will be displayed in the Device Manager of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.

Long-distance communications:

    USB-XW2Z-200S programming cable does not support long-distance communications. For long-distance communications, RS485/422 communication module can be chosen (model: FS-CIF11, products of Kollewin as well), which makes networking communications of dozens of PLC achievable, with the largest communications range of up to 2 Km.
Please Note: USB interface cable cannot be extended.
 
 
Model:USB-XW2Z-200S, USB programming cable for OMRON PLC

—–>buy-button$37.00

  Good quality, Best price, Greatest service!!!

If you'd like to get more, you can click here to visit our company store directly.
 

 

Pls feel free to contact me if any question.

Tel:86-755-26898905-8002

Email:crystal@kollewin.com





Leave a Reply